Spring Replacement Cost - Real Local Prices, Then Your Exact Quote

Raised-panel steel

Carriage house

Modern flush

Full-view glass

LiftMaster openers

Chamberlain openers

Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

Your new garage door for as low as$59/month*On approved credit; ask for current terms

You get a price before we start. It does not change when the truck arrives.

Get your free estimate

Explore

Styles & brands we work with

01Raised-panel steel02Carriage house03Modern flush04Full-view glass05LiftMaster openers06Chamberlain openers

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Spring Replacement Cost in Dallas?

A garage door spring replacement in Dallas typically runs $180 to $340, including the new springs and labor. Most homes use two springs, and a reputable company will quote both the parts and the work before anything is touched. At Doyle Garage Doors Dallas, the price you’re handed in writing is the price you pay, no exceptions.

Springs are rated by cycle life, which is the number of open-and-close operations they’re built to handle. A 10,000-cycle spring costs less than a 30,000-cycle spring and wears out sooner. In Dallas, where garage doors often cycle two or three times a day, spring life translates roughly to 9 to 12 years for standard springs and 25-plus for upgraded ones. We’ll walk through exactly what that means for your wallet below.

Spring Replacement Cost Breakdown (2026)

Here’s the straight answer for Dallas homeowners. These ranges reflect what we quote in 2026 for a standard two-car garage door in neighborhoods from Lakewood to North Dallas to Oak Cliff:

The spread between $180 and $340 comes down to a few things. Single-spring doors (usually on single-car garages) sit at the lower end. Double-spring doors on two-car garages sit at the higher end, because you’re replacing two springs, not just one. The spring’s wire gauge, coil diameter, and cycle rating also move the needle. A 7-foot door with a 9,000-cycle spring costs less than an 8-foot door with a 25,000-cycle spring, which requires more steel and a longer coil.

One thing that does not affect our price: the time of day or the day of the week. A Sunday afternoon spring failure in Far North Dallas costs the same as a Tuesday morning call. We don’t charge an after-hours premium, and we don’t pad emergency calls. The number you see on the written estimate is what you approve.

What’s Included in the $180-$340?

When we quote a spring replacement, the written price covers the springs, the labor, the balance check after installation, and a 365-day written guarantee on the work. We also inspect the cables, rollers, and center bearing while we’re there, and we’ll tell you if anything else is wearing thin. That inspection is included, not an add-on. Aaron Teague, owner at Doyle Garage Doors Dallas, put that policy in place because he’d rather you know about a $40 roller problem today than a $300 cable failure in six months.

What Affects Spring Replacement Pricing in Dallas

Dallas is a big market with a wide range of home ages. A 1980s house in Richardson’s Canyon Creek has a different door than a 2015 build in Frisco, and the spring system reflects that. Here are the factors that actually move the price:

• Door size and weight. A standard 16-by-7-foot two-car door weighs between 150 and 250 pounds. If you have an oversized or insulated door, it needs heavier springs with more coils, which cost more. Wood doors in neighborhoods like Lakewood and Highland Park weigh more than steel doors and often need an upgrade from the cheapest spring option.
• Spring cycle rating. Standard springs are rated for about 10,000 cycles. Upgrade to 20,000 or 30,000 cycles and you’ll pay $40 to $80 more per pair. For a door that’s opened four or five times a day, that upgrade pays for itself by lasting two to three times longer. This is the single biggest factor we see in Dallas pricing differences.
• Single vs. double spring setup. Most two-car doors use two springs side by side. Replacing only the broken one is possible, but we don’t recommend it. Both springs were installed together, they’ve cycled the same number of times, and the second one is usually close behind. Replacing both at once costs more now, saves a second service call later.
• Steel grade and wire thickness. Commercial-grade springs (used on heavier doors or in rental properties near White Rock Lake) cost more than residential springs. The difference is usually $20 to $50 per spring, and it’s worth it when the door operates multiple times daily.
• Access and working conditions. If the garage has low headroom, a finished ceiling that limits access, or a cluttered track area, the job takes longer. We don’t charge extra for it, but some companies do. When you compare quotes, ask whether the number on the phone matches the number on the invoice.
• Additional repairs found on site. If the cables are frayed, the rollers are shot, or the tracks need a realignment, those add to the total. At Doyle Garage Doors Dallas, you’ll get a written price for those repairs before we touch them. No surprises at the end of the job.

Dallas Climate and Spring Wear

Dallas heat takes a toll on garage door springs. The metal expands and contracts through 100-degree summers and occasional winter cold snaps, and that thermal cycling degrades the steel over time. Humidity near the Trinity River corridor also plays a role, especially on older springs that were never oiled. In our service area, we see spring failures most often in July and August, when daytime temperatures consistently pass 95 degrees and metal fatigue accelerates. A spring that’s been on the door for 10 or 12 years in Dallas has lived through roughly 10,000 open-and-close cycles and a decade of Texas heat. That’s the useful life.

This is also why we recommend checking your springs visually during the winter holiday season, when many homeowners are in and out of the garage more often. A small gap in a spring coil is the earliest sign of imminent failure. If you see one, call us before the spring snaps, because a snapped torsion spring under 200 pounds of tension is not a do-it-yourself repair.

How to Save on Spring Replacement

You can’t control the price of steel, but you can control when and how you replace a spring. Here are practical ways to keep the cost down without cutting corners:

• Replace both springs at once, even if one still holds. This is the most common money-saving advice we give in Dallas. Replacing one spring costs $180 to $260. Replacing both at the same visit costs $240 to $340. Replace one now and the second will likely snap within months, which means a second service fee, a second afternoon off work, and a second risk of the door slamming shut.
• Choose the 10,000-cycle spring if you’re selling soon, but upgrade if you’re staying. If you plan to list your Dallas house in the next two years, the standard spring is fine. If you’re staying long-term, the $40 to $80 upgrade to a 20,000 or 30,000-cycle spring is the cheapest insurance you’ll buy this year.
• Ask for a written quote before work starts. Not a verbal number. Not a “rough estimate.” A written quote. At Doyle Garage Doors Dallas, that’s standard practice on every job, from a single spring in a Southlake garage to a full system replacement in Uptown.
• Schedule during regular hours if you can. We don’t charge extra for nights or weekends, but other companies do. If you’re comparing quotes in Dallas, ask specifically whether there’s an after-hours fee. If there is, your $240 spring job could become $400 by the time the technician drives away.
• Take advantage of free estimates. Call (972) 362-1457 and we’ll give you a price range over the phone, then confirm it in writing before any work starts. The estimate doesn’t cost you a thing, and it means you’ll never sign off on a surprise invoice.

Is Spring Replacement Covered by Homeowners Insurance?

Generally, no. A broken garage door spring is classified as normal wear and tear, and most Texas homeowners policies exclude wear-and-tear claims. The exception is when a covered peril causes the damage, such as a tree limb falling on the door during one of Dallas’s spring thunderstorms, or a vehicle impact in the driveway. If your spring failure is tied to storm damage or an accident, document it thoroughly and file a claim. If it’s simply an old spring that gave out, the cost is yours. The good news: $180 to $340 is one of the most affordable major repairs on a Dallas home, and it’s a predictable, one-time expense when done correctly.

How We Replace a Garage Door Spring (Step by Step)

Here’s what the process looks like at Doyle Garage Doors Dallas, so you know exactly what to expect when the technician arrives at your door in a marked uniform and hands you a written price:

1. You call (972) 362-1457. A live person answers, day or night, weekend or holiday. You describe the problem: the door won’t lift, you heard a loud bang in the garage, or the door opened a few inches and stopped.
2. We schedule a time that works for you. Often the same day in Dallas and surrounding neighborhoods, including Lakewood, Preston Hollow, and the M Streets.
3. We send you the technician’s name and photo before the visit. You know who’s coming before they ring the bell. When they arrive, they show a photo ID badge at the door. That’s the Threshold Standard, and it’s how we’ve operated since 2001 as part of the Threshold Group family of home-service companies.
4. The technician inspects the full door system. Springs, cables, rollers, tracks, opener. They’ll identify the broken spring and check the condition of the second spring, the cables, and the opener’s travel limits.
5. You receive a written price. Not a verbal estimate. A line-item, written quote handed to you before a single bolt is turned. No upsell pressure, no invoice surprises at the end.
6. The repair is completed. The technician unloads the tension safely (torsion springs are the large coils mounted above the door that do most of the lifting, and they hold roughly 150 to 250 pounds of tension). Old springs come off, new springs go on, and the door is balance-tested.
7. You get the 365-Day Done Right Promise in writing. If the spring or the work fails within 365 days, we come back and make it right at no charge. That includes a free second visit if the repair fails. No argument, no fine print.
8. Final walkthrough. The technician opens and closes the door three or four times, shows you how it sounds and moves, and leaves your garage cleaner than they found it.

Note on safety: We never recommend attempting a torsion spring replacement yourself. The spring is under enormous tension and can cause serious injury if it releases unexpectedly. This is a job for a trained professional with the right winding bars and experience. Our technicians are background-checked and identity-verified under the Threshold Standard, and they do this work every day.

How Much Does Spring Replacement Cost in Dallas? (Quick Recap)

• Standard single spring replacement: $180 – $260
• Standard double spring replacement: $240 – $340
• High-cycle (20,000+ cycle) springs: $280 – $400
• Spring + cable replacement: $280 – $500
• Dallas-specific drivers: door size, spring cycle rating, hot-summer thermal wear, single vs. double spring
• Includes: written price, labor, balance check, 365-day written guarantee

FAQs – Spring Replacement Cost

How much does it cost to replace a garage door spring in Dallas?

A garage door spring replacement in Dallas typically costs $180 to $340 for a standard two-car door with both springs replaced. Single springs run $180 to $260, and both springs together with labor and a balance check fall in the $240 to $340 range. Call (972) 362-1457 for a free estimate and a written quote before any work starts.

Is it cheaper to repair or replace a garage door spring?

Springs cannot be repaired safely. Once a torsion spring snaps, replacement is the only correct option, and Dallas pricing runs $180 to $340. Some companies will patch a spring with a temporary sleeve, but that’s unsafe and not something we offer. A replacement spring comes with our 365-Day Done Right Promise in writing, so you’re covered for a full year after the work.

How long do garage door springs last in Dallas?

Standard 10,000-cycle springs last about 9 to 12 years in Dallas under normal use of two or three cycles per day. Upgraded 20,000 to 30,000-cycle springs last 25 years or more. Dallas heat accelerates metal fatigue, which is why we see most failures in July and August.

Can you replace a garage door spring the same day in Dallas?

Yes. Doyle Garage Doors Dallas offers same-day spring replacement across Dallas and nearby neighborhoods, and we answer calls 24/7 with a live person, not a voicemail tree. Emergency service costs the same as a regular appointment, $220 to $380 for same-day replacement with no overtime fee. Call (972) 362-1457 and we’ll get a technician out today.

What happens if the new spring fails within a year?

Under our 365-Day Done Right Promise, we come back and replace the spring at no charge. Every Doyle Garage Doors Dallas repair includes this written guarantee automatically, and if the repair fails for any reason within 365 days from the date of repair, the second visit is free. No argument, no fine print.

How much does a garage door opener repair cost in Dallas?

Opener repairs in Dallas typically run $120 to $320, depending on whether it’s a limit switch issue, a trolley carriage problem, or a full logic board replacement. If your opener is old enough that repairs exceed half the cost of a new unit ($250 to $550 installed), we’ll show you the numbers side by side and let you decide.

Why Dallas Homeowners Choose Doyle Garage Doors Dallas

We’re part of the Threshold Group family of home-service companies, founded in 2001, and each location is independently owned and operated under the Threshold Verified standard. For Dallas homeowners, that means something specific: every technician is background-checked and identity-verified, and you receive their name and photo before they arrive. They show a photo ID badge at the door, every time, no exceptions. That’s a concrete safety step for people who take the stranger-at-the-door concern seriously, and it’s one no generic garage door company can match.

We service all major brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Our spring replacement service in Dallas is factory-trained on every one of these systems, so the technician who walks through your door knows your door.

And the price? It’s written down and handed to you before a single bolt is turned. No verbal estimates, no invoice surprises. If you’re looking for a garage door company that tells you the cost, shows you who’s coming, and backs the work in writing for a full year, call Doyle Garage Doors Dallas. You can reach a live person at (972) 362-1457 any time, day or night, weekends and holidays included. The estimate is free, the quote is written, and the guarantee is 365 days long.

Pricing reflects the Dallas market as of 2026. Doyle Garage Doors Dallas offers free estimates – call (972) 362-1457.

Written by Aaron Teague, Owner at Doyle Garage Doors Dallas, serving Dallas since 2001.