Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Installation for Dallas Homeowners
Garage door installation in Dallas typically costs $700 – $2,200 for a complete door and labor package. That number shifts based on door size, material, insulation rating, and whether old hardware gets reused or replaced. We’ve installed doors in neighborhoods from Lakewood to Oak Cliff since 2001, and every job starts the same way: you know the total before we order a single part.
You’re not just buying a door when you call us. You’re deciding who gets to stand in your driveway and know their way around your home’s largest moving object. That’s a real decision for the homeowner who’s often home alone, has kids napping inside, or has lived in the same Highland Park house for thirty years and doesn’t hand out trust easily. So here’s what we do differently: before any technician arrives, you get their name and photo. At the door, they show a photo ID badge. The price is written down and handed to you before work begins. And every repair we make is covered by our 365-Day Done Right Promise, in writing, at no extra charge. Call (972) 362-1457 to talk with a real person about your door.
Garage Door Replacement
Garage Door Replacement means taking out the door you have and putting in a new one that fits the same opening, usually because the old one has failed in a way that repair can’t fix cost-effectively. In Dallas, we see this most often when a door has rusted through at the bottom panel, when the track was damaged by a vehicle or a storm, or when a homeowner wants to upgrade from a single-layer door to an insulated model that keeps the garage from baking in August. A new door installation in Dallas runs $700 – $2,200 depending on size and material.
Rusted Bottom Panels
Dallas humidity and the occasional ice storm that leaves salt residue on drives do a number on steel doors. Once the bottom panel rusts through at the corners, water gets inside and the panel starts pulling away from the hinges. A replacement door is often cheaper than trying to patch a panel that’s already lost its structural integrity.
Storm or Impact Damage
North Texas storms throw hail that dents wood and fiberglass doors, and spring winds have a way of sending trash cans and tree limbs into the garage track. If your door is off its tracks and the top section is warped or cracked, replacement is usually the better long-term move. We’ll tell you straight if the existing track and opener are still good enough to reuse.
Styles & brands we work with
Garage Door Installation Service
Garage Door Installation Service is the complete job: new door ordered to your opening’s measurements, old door removed and hauled off, new track, springs, rollers, and hinges installed, and a final balance test so the door doesn’t fight you on the way up. We handle it start to finish, including opener compatibility. New door installation in Dallas ranges from $700 – $2,200, with mid-range insulated steel doors taking up most of what we install.
Full Removal and Disposal
We don’t leave the old door leaning against the side of your house. The crew unbolts the existing door, pulls the old springs, and loads everything into our truck for proper disposal. You pay one price, and there’s no second trip to haul away debris.
Insulated Door Upgrades
A lot of Dallas garages are attached to the home and hold a water heater, a freezer, or a workshop. An insulated door can drop garage temperatures by 15 to 20 degrees in July. We’ll show you the difference between single-layer, double-layer, and triple-layer steel doors in plain terms, including realistic R-values for our climate.
Commercial Garage Door Installation
Commercial Garage Door Installation covers full-height sectional doors, rolling steel doors, and high-cycle hardware for Dallas businesses, warehouses, and loading docks. These doors open and close dozens of times a day, so they need heavier tracks, stronger springs rated for high cycle counts, and hardware that won’t wear out in a year. Pricing for commercial work is quoted per opening after a site visit, but you can expect most standard commercial sectional jobs to start around $1,500 and go up from there based on door size and duty cycle.
High-Cycle Spring Packages
Standard residential torsion springs are rated for around 10,000 cycles. A commercial door at a Farmers Branch shipping dock might cycle 50 times a day. We size springs for 50,000 to 100,000 cycles on commercial jobs so you’re not calling us every eight months with a snapped spring.
Rolling Steel and Sectional Doors
Rolling steel doors fit low-headroom bays and stand up to forklift traffic. Sectional doors give you better insulation and can be matched to your building’s frontage. We’ll walk the site, measure the opening, check the power supply for the opener, and give you a written quote that covers the door, the install, and the haul-away.
Garage Door Installation Contractors
Garage Door Installation Contractors are the people who actually show up with the truck, the tools, and the torque wrench. You’re not hiring a salesperson who subcontracts the work to the lowest bidder. Every Doyle Garage Doors Dallas technician is background-checked and identity-verified under the Threshold Standard. We send you the name and photo of whoever is coming before they ring the bell. The ballpark range for a new residential garage door in Dallas is $700 – $2,200.
Why Our Techs Stand Out
Each technician arrives in a clean marked uniform, shows a photo ID badge at the door, and sets the price with you in writing before touching a bolt. That’s not a “nice to have.” For a homeowner weighing whether to let a stranger into the garage, it’s the difference between dread and a normal Tuesday.
Aaron Teague’s Team on the Ground
Our Dallas crew is led by Aaron Teague, and he holds our techs to the same standard he’d expect for his own family’s home. Aaron has built this crew around one simple test: would you send this person to your grandmother’s house in Grand Prairie without worrying? If the answer’s no, they don’t ride in our truck.
Garage Door Seal Installation
Garage Door Seal Installation replaces the rubber weatherstrip along the bottom of the door and the vinyl trim seals on the sides and top. The bottom seal, what the industry calls the astragal, rots, cracks, or flattens over time and lets water, leaves, and bugs into the garage. In Dallas we replace a lot of these after summer heat bakes the rubber into a stiff crust. Seal installation typically falls within our $120 – $240 track realignment and hardware range for simple jobs, with full perimeter sealing priced on inspection.
Bottom Astragal Replacement
The bottom seal slides into a channel on the door and gets hammered every time the door closes. Once it’s cracked, Dallas rain runs straight under the door and puddles on the slab. We cut the new seal to your door width, slide out the old one, and press the new one in with the right retention channel.
Perimeter Weatherstripping
Side and top seals stop the daylight gaps that let dust, wasps, and heat into the garage. We check the jamb brackets while we’re in there, because a sagging seal is often the first sign that the door itself has shifted. It’s a quick job, but it has to be done with the door in the down position so the seal actually contacts the door face.
New Garage Door Installation
New Garage Door Installation is what it sounds like: a brand-new door for a garage that may have never had one, or a full replacement where you’re changing size, material, or style. Dallas homes built before the 1980s sometimes have single-car openings that owners want widened, or a detached garage that’s been used as storage and now needs a door that actually works. A new door install in Dallas runs $700 – $2,200, with custom sizes and wood doors at the upper end.
Custom Sizing and Retrofit Work
Not every garage takes a stock 16-by-7 door. We measure the opening, check the headroom for the torsion system, and order a door cut to spec. For odd-size openings in older East Dallas bungalows or Cedar Hill hillside homes, we quote the modification cost upfront so there’s no surprise when the door arrives.
Insulation, Windows, and Style Choices
Do you want a Clopay door with a woodgrain steel finish you’ll never have to repaint, or a Wayne Dalton model with insulated glass panels up top? We’ll show you physical samples, not a catalog PDF. You get straight talk on what costs more, what lasts longer in Dallas sun, and what fits your home’s architecture in Lakewood versus a newer build in Coppell.
Brands We Service
We’re factory-trained to service and install Clopay doors, and we’ve put in a lot of their insulated steel lines across Dallas. Clopay’s Intellicore polyurethane doors hold up well to north Texas heat and we stock their common panel sizes for warranty work.
Amarr doors show up regularly in Highland Park and Richardson garages, especially their Classica and Heritage lines. We know their spring and track geometry well enough that we can often source a matching panel instead of selling you a whole new door.
We also install and service Wayne Dalton doors. Their TorqueMaster spring system is different from a standard torsion setup, and a lot of techs won’t touch it. We do, and we’ll explain the difference before we start. Same with Craftsman openers still running in older Dallas homes. Whether you have one of these brands or something else entirely, we can help. Call us at (972) 362-1457 and we’ll tell you what you’re working with.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The door opens a few inches, then stops. That’s usually a broken spring or a bent track. A spring under tension can release violently. Don’t try to muscle the door open; call a technician. Spring repair in Dallas runs $180 – $340.
- The door is crooked in the opening. If one side hangs lower than the other, a cable has likely snapped or slipped off the drum. The door is under uneven tension and can drop fast. We replace cables and re-seat the drum; cable repair runs $130 – $250 in Dallas.
- You hear grinding or see metal shavings on the track. That’s metal-on-metal wear, often from a failing roller or a dry bearing in the opener carriage. Left alone, the roller can seize and tear up the track. Roller replacement is $110 – $220 and beats a track rebuild.
- The door reverses when it touches the floor. The limit switch is out of adjustment, which means the opener thinks it hit something when it didn’t. It’ll eventually refuse to close or leave a gap at the bottom. Opener repair in Dallas runs $120 – $320.
- The door sags when you pull the release handle. A manually operated door should stay put in the half-open position. If it falls, the spring tension is out of balance and the opener is doing all the work. That wears out the opener gears and can drop the door on someone standing under it.
Our Process, Step by Step
- 1
Call and talk to a person. When you call (972) 362-1457, a real person answers, day or night, weekends and holidays. You describe what’s happening. We ask a few questions about your door’s make, age, and symptoms, and we schedule a window that works for you.
- 2
Get your tech’s name and photo before arrival. After your appointment is set, we send you the name, photo, and arrival time of the technician coming to your door. You know who to expect before you open the door. That’s the Threshold Standard.
- 3
Inspection and written price. The tech arrives in uniform, shows a photo ID badge, and inspects the door, springs, track, and opener. You get a written price before any work starts. No verbal estimates, no surprise charges after the fact.
- 4
The work, done right. We install the door, springs, and hardware to manufacturer spec, set the opener limits, and test the auto-reverse. Every repair is covered by our 365-Day Done Right Promise. If it fails within 365 days from the date of repair, we come back and make it right at no charge.
- 5
Final walkthrough and written guarantee. Before we leave, we run the door through a full cycle, show you what was done, and hand you the written guarantee. You also get a firm plan for ongoing upkeep if you want it.
How Much Does Garage Door Installation Cost in Dallas?
A typical single car door installation in Dallas lands between $700 and $1,400 for a standard steel door with basic insulation. A double-wide or upgraded door with windows and higher R-value insulation runs $1,200 to $2,200. Spring repair runs $180 – $340, cable repair $130 – $250, and opener installation $250 – $550. If you’re also replacing the opener, that’s a separate line item.
What affects the price? Door size, material (steel vs. wood vs. fiberglass), insulation level, window placement, and whether the existing track and opening are square enough to reuse. A rusted track or a sagging header adds labor. What you should watch for: companies that quote a “door only” price and then bill for springs, track, and a haul-away fee. Our written quote includes the complete job. Your free estimate includes exact measurements, a written price, and no obligation.
Our Service Area Near Dallas
We install garage doors throughout Dallas and the surrounding area, including Richardson, Grapevine, Grand Prairie, Coppell, Cedar Hill, Farmers Branch, Lancaster, Sunnyvale, Highland Park, and Lakewood. Most installation visits in Dallas proper are scheduled within a few days, and we keep common door sizes in stock for faster turnaround. Whether you’re in Oak Cliff or up near Garage Door Installation in Richardson, the same written-price and tech-verification rules apply. For everything else, start at our home page.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Installation in Dallas
Garage door installation is the complete replacement of your existing door with a new one, including the door panels, track, springs, rollers, hinges, and hardware. The job includes removing and hauling away the old door. In Dallas, a standard installation takes 4 – 6 hours, and you get a written price before any work starts.
Most residential installations take one visit, usually 4 – 6 hours. Larger or custom doors can take a full day. We’ll tell you the expected timeframe when we schedule, and the technician confirms it with you at the door before work begins. Call (972) 362-1457 to schedule.
A new garage door in Dallas typically costs $700 – $2,200 depending on size, material, insulation, and whether the track and opener need replacing-see our garage door installation cost guide for full details. Spring repair runs $180 – $340 and opener installation $250 – $550. We give you a written line-item price before any work starts, and that’s the price you pay.
Yes. We install and repair Clopay, Amarr, Wayne Dalton, Craftsman, and most other major brands. We stock common Clopay and Amarr parts and have specific training on Wayne Dalton’s TorqueMaster system. If you’re not sure what brand you have, describe the door and we can usually identify it over the phone.
We offer emergency repair service, but a full door installation is typically scheduled, not same-day. If your door is stuck open or won’t close and you need it secured tonight, call (972) 362-1457 and we can send a tech to get it closed and safe, then schedule the installation.
Every repair we make is backed by our 365-Day Done Right Promise. If it fails within 365 days from the date of repair, we come back and make it right at no charge. Your new door also carries the manufacturer’s warranty, and we handle the paperwork and any warranty claims for you.
Clear the area inside the garage about 6 feet back from the door, and move vehicles out of the driveway. Disconnect the opener or leave it connected and we’ll handle it. If you have pets, keep them inside during the installation. Everything else, including the disposal of the old door, is our job.
Schedule Your Garage Door Installation Service in Dallas Today
You’ll get a written price before any work starts, a name and photo of your technician before they arrive, and a 365-day guarantee on every repair. Call (972) 362-1457 for a free estimate. A real person answers, day or night, weekends and holidays.
Written by Aaron Teague, Owner at Doyle Garage Doors Dallas, serving Dallas since 2001.